https://www.youtube.com/watch?v=LBoYTf9r4Mw
Hole option:
- Select the face where you want to place the hole
- Select reference points to determine distance from different edges
- Select hole types, tap types, drill point (flat bottom, angled bottom)
- Then set other parameters for the hole, e.g. depth, diameter of counterbore section, etc.
To make multiple, evenly spaced holes:
- Make a sketch
- Select a face
- Select the Create > Point option
- Mark a position of the first hole
- Select the Circular Pattern or Rectangular Pattern and use it on the point
- Finish sketch
- Select Hole tool
- For Placement, select Multipoint
- Click on the sketch points you created earlier to place the holes